Form Center

2. Thank you for your interest in using our 3D printer!
   New Ulm Public Library 3D Printer Policy

   Please fill out the following form to request a 3D print job at the New Ulm Public Library. You can review the library's policy just above this sentence.

4. First Name*
6. Last Name*
8. Contact email*
10. Please select the material color for your print request*
    -- Select One --BlackWhiteRedYellowBlue

    Staff will do their best to match your color preference, but color may be limited by available materials.

12. Print Specifications

    The next two questions relate to the printing process for your request.
    
    The first question asks about level of detail. This will affect the overall texture of the print and has a large impact on printing time, which will affect the cost of the print.
    
    The second question asks about needing exact measurements. If you are printing a replacement part, scale model, or prototype, then your print file should already be at the correct size or scale. Please check "Yes" if you need those dimensions. Information on the possible print dimensions our 3D printer can build are found in the library's 3D Printer Policy linked above.

14. What level of detail does your print require?*
    -- Select One --No preferenceHigh Speed (faster finish, thicker layers, and distinctive layer lines)Low Quality (thicker layers, noticeable layer lines)Medium Quality (standard layer thickness, tangible layer lines)High Quality (thinner layers, finer detail)Ultra Quality (extreme detail, smooth layer transitions)
16. Does your print require specific dimensions?*
    -- Select One --Yes, it needs to have the exact file dimensionsYes, it needs to keep the file's scale dimensionsNo preference
18. Upload Your 3D Model File*

    Please upload the 3D model file for your print request here. It needs to be in one of the recognized file formats found in the 3D Printer Policy linked above.

Leave This Blank:


20. 1. Receive an email copy of this form.
21. Email address

    This field is not part of the form submission.

22. Submit

* indicates a required field